Pre-fab sauna kit details

Pre-fab saunas: fabricated room kits include all components and fixtures for a complete functional sauna:

A) Framing – of 2″x2″ Oregon Douglas fir to prevent warping and dry rot. Frame fastened with galvanized fasteners.
B) Insulation R11 (3-1/2″) Owens-Corning fiberglass with foil-back on walls and ceiling; vapor barrier of type c Reynolds building foil on walls and ceiling.
C) Exterior Siding of 11/32″ rough sawn fir plywood (1/2″ T & G red cedar available optionally). Trim included.
D) Interior Paneling of 1″x4″ (full 3/4″ thickness) clear kiln-dried, T & G small V-joint for neat appearance width a choice of 4 different woods; base rim of 2″x4″.
E) Exclusive Concealed Interlocking System locks walls together with the greatest strength and neatest appearance – eliminates the need for ugly interior moldings used by others.
F) Pre-hung Door – V.G. Oregon Douglas fir rails to prevent warping, tempered thermal-pane glass for a spacious, open look; redwood or hemlock jamb, stoppers, casing and threshold; hardware – 4″x4″ butt hinges (3, brass plated), ball catch (keeps door securely closed, unlike self-closing hinge).
G) Finlandia or Harvia Heater: with built-in or optional wall-mounted control panel including 60 minute timer.
H) Benches: constructed of S4S 2″x2″ tops with 1/2″ spacing with 2″x4″ facing with eased edges to eliminate sharp edges & slivers. All fasteners applied from bottom to eliminate ugly nail holes and possibility of nail head protruding to burn bather.
I) Head/back rest(s): for upper benches, tapered 16″x20″.
J) Heater Fence: for safety, of 1″x2″ and 2″x2″.
K) Super Deck: flooring squares for walking area of floor – removable, sanitary, washable, non-skid synthetic material.
L) Vents: lower – neatly cut into room base; upper – supplied for pre-cut space.
M) Light: Vapor proof, wall-mounted P5511 .
N) Stones: from Finlandia; periodite – igneous type – best for heat retention and safety.
O) Accessories Provided: wooden bucket with liner, dipper, thermometer, and bronze plexiglass bathing sign.
P) Instruction: detailed instructions provided for assembly.

Preparations ~ Options ~ Services

We can provide a complete professional installation service (depending on your location) including these standard preparation steps:

A) Complete installation of your pre-fab sauna including delivery.
B) Electrical Routing and supply lines i.e. 120 vac lighting/outlets and 220 vac heater supply (specify single phase or 3-phase)
C) Optional drain line plumbed into the concrete or platform sub-floor.
D) Standard floor finishes included flooring sealant or linoleum. Options include tile, cement, or sprung wood decking.

*All customized options beyond standard preparations will be itemized and amended to the final cost.
Expect quality, beauty and the highest degree of craftsmanship in all Northernlight Saunas